4 1 7 - 5 3 2 - 1 2 8 8

API 3124MB+ Discrete 4-Channel Mic/Line Pre w/ Stereo Mixer

API 3124MB+ Discrete 4-Channel Mic/Line Pre w/ Stereo Mixer

$3,510.25 USD

3124+, w/ Stereo Mixer plus Transformer Balanced Outputs

API 3124MB+ Discrete 4-Channel Mic/Line Pre w/ Stereo Mixer

Both the 3124+ and the 3124mb+ are designed with the professional engineer in mind. Both units give the highest possible quality 4 channel mic preamp. However, the 3124mb+, provides an additional audio mixer with a transformer balanced output, keeping the unit size and price at a reasonable level. Both models are equally at home in the control room, studio, and recording truck or on stage.

The 3124mb+ utilizes the same microphone preamp circuit that is used in all API consoles. It uses the RE-115 K mic input transformer along with the same output transformer that is used in API equalizers. The unit has an internal 48-volt phantom power supply, which is front panel switchable for each channel. Also provided is a front panel -20 dB pad switch that affects both the mic and line in. A 1/4" phone jack is available on the rear panel for each channel as an insert tip-send/ ring-return placed between the mic pre amp output and the mixer input.

Like the 3124+, the 3124mb+ provides up to 65 dB of gain to an output clip level of +28 dBu. The Hi-Z front panel input goes directly to the op-amp, allowing a low level input such as a guitar or bass to be amplified without a matching transformer or direct box. This Hi-Z input can accept input levels as high as +20 dBu, making it perfect for keyboards and other high level devices. The rear output is an XLR connector.

Additionally, the 3124mb+ adds a stereo panner with a level control, and a post "fader" aux send. The stereo panners and the aux sends are bussed to master output controls and then to the rear panel jacks. A stereo AUX return is provided to return effects or cascade additional mixers for more inputs. The unique stereo aux return control acts to balance the left/right signal, yet staying stereo. It can also be used as a mono return.


  • Uses API 2520 Op-Amp
  • Classic Console Circuit
  • Four XLR Mic Inputs
  • Four 1/4" Un-Balanced Inputs
  • Front Panel Polarity Switch
  • Front Panel 20 dB PadSwitch
  • Front Panel Mic/Line Switch
  • Front Panel 48V Power Switch
  • Output Clips at +30 dBm

For more information, visit API.