6 1 5 - 8 0 0 - 7 6 1 6

Autoscript Timecode Display Unit

Autoscript Timecode Display Unit

$1,620.00 USD

LED Six Digit On Air Time or Countdown display. Interfaces to Studio Time code, combined with Tally Light function. Tally’s green to red.

Autoscript Timecode Display Unit

Autoscript Clock Plus LED Timecode Display

The Autoscript Clock Plus LED Timecode Display allows you to view SMPTE/EBU timecode information and also changes color from green to red on application of a Tally input. Featuring 2.25" (5.71 cm) tall digits, the display supports HH:MM:SS A/P (hours / minutes / seconds, AM/PM) format in 12 or 24 hour mode.

The timecode input is obtained from the VITC (Vertical Interval Timecode) in the video input or from the LTC (Linear Timecode). An internal crystal oscillator enables the timecode display to continue updating the time, even if the timecode source is removed.

- For viewing SMPTE / EBU timecode information

- Application of a Tally input indicates color change (from green to red)

- Timecode input obtained from the VITC in the video input or from the LTC

- 2.25" (5.71 cm) tall digits

- HH:MM:SS A/P (hours / minutes / seconds, AM/PM) format in 12 or 24 hour mode

- Instantly syncs with the input time when a time-code source is connected

- Internal crystal oscillator enables the timecode display to continue updating the time, even if the timecode source is removed

 

Display

Format: HH:MM:SS A/P

Size

Size (HH:MM:SS): 2.25" (A/P): 1.5"

Linear Time Code Input

Standard: SMPTE 12M linear time code
24, 25 or 30 Fps nominal
Impedance: > 50k ¿, balanced
Connector: 3 pin male TiniQ-G miniature XLR
Level: 1v to 3.0 p-p

Vertical Interval Time Code Input

Standard: PAL or NTSC
Impedance: 75 ¿, balanced
Connector: BNC socket
Level: 1v p-p

Tally Control Input

Type: Logic signal, low = green
High (>2V) = red
Connector: 3.5 mm mono jack socket
Sleeve = ground, tip = signal

Opto Sensor Input

Type: Light dependent resistor, 20k ¿ at
10 lux, 5K ¿ at 100 lux OR (grounding) contact closure


* Certain Vitec products may be considered Special Order and a 25% restocking fee may be imposed by the Manufacturer.


For more information, visit Autoscript.